K&A Manufacturing • 800.298.4351 • www.raproducts.com/install
3 of 4
Step 1
D
F
Step 2
A
D
B
• Lay worksurface on a protected surface with
the pilot holes facing up.
*The following does NOT apply to desks
sized 48” or smaller.
• Align U-Channel (F) with the pre-drilled pilot
holes along the center of the worksurface.
• Attach U-Channel to the worksurface with 5/8”
round washer head wood screws (D).
•
Do NOT fully tighten
until all screws are
installed.
A
D
B
• Align one of the post legs (E) with the predrilled
pilot holes.
• Attach the leg to the worksurface with 5/8”
round washer head wood screws (D).
•
Do NOT fully tighten
until all screws are
installed.
• Repeat to attach remaining 3 legs.
E
D
