6
SCALE INSTALLATION
The 310-M3 Series gauge averages the pressure from two air bags on an axle
group with two height control valves to give a single axle group weight. This
product comes in a protective box and the following steps will walk you through
how to correctly mount and install the scale.
DO NOT mount the scale directly to the chassis or any other main
beam unless it is approved by the vehicle manufacturer. Doing so
may void the warranty with the vehicle manufacturer.
MOUNT SCALE
DUMP AIR FROM SUSPENSION SYSTEM
2
1
Choose a location to mount the scale that is easily accessible and safe
from potential damage (forklift posts, tire caps, etc.).
Cut the air line going to
one of the air bags
connected to the first
height control valve in the
suspension group to be
monitored.
!
CUT EXISTING AIR LINE
3
