04
. With the help of the corresponding cylinder screw and the associated lock washer, fasten the half clamp hook
on the loudspeaker (G), making sure that the connection is tight and secure. Now screw
the ring bolt, which has been tested in accordance with DIN EN 10204 3.1, into the corresponding thread on the loud-
speaker (H) as far as it will go and use it as a safety eyebolt.
G
H
H
TECHNICAL SPECIFICATIONS
MANUFACTURER’S DECLARATIONS
Our currently valid warranty conditions and limitation of liability are available at:
http://www.adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.pdf
In the event of service requirements, please contact
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu Anspach, Germany
E-mail: [email protected] | +49 (0)6081-9419-0
PROPER DISPOSAL OF THIS PRODUCT
(Valid in the European Union and other European countries with waste separation) This
symbol on the product or the associated documents indicates that the device must not
be disposed of with normal household waste at the end of the product’s life, in order to
prevent environmental damage or personal injury caused by the uncontrolled disposal of waste.
Please dispose of this product separately from other waste and recycle it to promote sustain-
able economic cycles. Private customers can contact the dealer from whom the product was
purchased or the relevant local authorities to obtain information on environmentally friendly
waste management. Commercial users can contact their supplier and check the contractually
agreed terms and conditions on the disposal of equipment. This product must not be disposed of
with other commercial waste.
Subject to printing errors and mistakes, as well as technical or other changes!
Item no.
RIG400205801
Product type:
Loudspeaker accessory
Type:
Mounting set for fixed installations
Package contents: Half clamp hook (tensile load up to 250
kg,
ø 48–51 mm)
M12 locking nut (Poly DIN 982 A4)
M8 ring bolt (DIN EN 10204 3.1)
M8 x 35 mm cylinder screw
Hexagonal socket (DIN 912 A2)
M10 x 35 mm cylinder screw
Hexagonal socket (DIN 912 A2)
M8 lock washer
M10 lock washer
Dimensions
Half clamp hook
(H x W x D)
95 x 165 x 30 mm
Total weight
0.67 kg
