Selecting the temperature
1.Check the ironing instructions on the garment to be ironed.
2.If the garment does not have any ironing instructions but you know the kind of fabric in
question, use the chart below.
3. Fabrics that have some kind of nish(polishing . wrinkles , contrasts….)can be ironed at the
lowest temperatures.
4.If the fabric contains several kinds of bres ,always select the temperature applicable ,if an
article contains 60% polyester and 40% cotton ,you must always choose the temperature
corresponding to polyester and without steam.
5. First classify the articles to be ironed according to the most suitable ironing temperature : wool
with wool, cotton with cotton, etc. as the iron heats up as fast as it cools , start by ironing the
articles requiring the lowest temperature such as those made of synthetic bres . Progress
towards those that require the highest temperatures.
6.Turn the temperature control until it is in front of the appropriate signal according to the
following:
· position for synthetic
·· position for wool ,silk
··· position for cotton or linen
How to ll the water tank.
1.Unplug the iron.
2.Set the steam button to dry ironing .(g.1)
3.Fill the tank through the lling hole.(g.2)
-If you have hard water ,it is advisable to use only distilled or demineralized water.
-
do not use chemically de-limed water or perfumed
4.
Do not store the iron with water in the tank.
Steam ironing
1.Fill the iron as described in the section “how to ll the water tank”.
2. Plug the iron into the mains.
3.Steam ironing is only possible when the highest temperatures shown on the temperature
control are selected .
Otherwise ,water may escape through the soleplate.
4. Wait until the pilot light goes out , which indicates that the selected temperature has been
reached.
5.Turn the steam button to the required position.
6.When the ironing is nished and during breaks in ironing , place the iron in its upright position.
7.Disconnect the iron from the mains supply . Pour of any remaining water and leave the iron to
cool off.
Spray
1.The spray can be used in any position, either in dry or steam ironing, as long as the water tank
is lled with water.
2.Press the spray button for this function
NOTE : This button has to be pressed repetitively to start this function for the rst time.
