Important safeguards
When using your iron, basic safety precautions should always be followed , including the
following:
Read all instructions before using
1. Use the iron only for its intended use.
2. To protect against the risk of electric shock, do not immerse the iron in water or other liquids.
3. The iron should always be turned to “min” before plugging or unplugging from the mains
outlet. Never pull the cord to disconnect from the mains: instead, grasp plug and pull to
disconnect.
4. Do not allow the cord to touch hot surfaces. Allow the iron to cool completely before putting
away.
5. Always disconnect the iron from the electrical outlet when lling with water or emptying and
when not in use
6. Do not operate the iron with a damaged cord or if the iron has been dropped or damaged. To
avoid the risk of electric shock, do not disassemble the iron .take it to a qualied service agent
for examination and repair. Incorrect re-assembly, can cause a risk of electric shock when the
iron is used.
7. Close supervision is necessary for any appliance being used by or near children. Do not
leave the iron unattended when connected to the mains or on an ironing board.
8. Burns can occur from torching hot metal parts, hot water or steam, use caution when you turn
a steam iron upside down-there may be hot water in the reservoir.
9. If the iron is not operating normally ,disconnect from the power supply. And contact the
nearest authorized service agent.
10. Your iron is designed to rest on the heel. Do not leave the iron unattended when switched
on. Do not place the iron on an unprotected surface even if it is on its heel rest.
11. Caution, hot surface
Know your steam/spray/dry iron
1
10
2
11
3
12
4
13
5
14
6
15
7
16
8
17
9
18
Soleplate
Skirt
Watertank
Ornament ring
Spray nozzle
Front cover
Water inlet lid
Spray button
Shot of steam buttom
Key
Transparent lamp cover
Power cord
Cord guard
Handle
Rear cover
Housing
Temperature knob
Slefcean knob
