RIEXINGER BSM 1000, Руководство по эксплуатации

Страница: 55 / 86

9. Maintenance 53
9. Maintenance
Danger!
Running saw band may cause serious severance injury!
Descending saw bow may pinch the operator!
Only one person may perform maintenance while the machine is turned off (excep-
tions described in respective context).
Attention!
Perform all maintenance work thoroughly and on time!
All maintenance work in this manual must be performed thoroughly and on time to
keep the machine operational with a high uptime.
Attention!
Only use original spare parts!
For reasons of personal safety and to ensure the proper functioning of the machine,
you should only use original spare parts. It cannot be ensured that spare parts from
other manufacturers are constructed with the necessary strain-bearing- and safety
capabilities.
Activity How often Description
Clean the machine Daily or after usage (see Chap. 9.1 on p. 54)
Check saw-band tension Weekly (see Chap. 9.2 on p. 55)
Check safety equipment Weekly (see Chap. 9.6 on p. 64)
Check steel ropes of saw bow lift, if
there are broken strands or splice
Weekly
In case of damage let change
steel rope immediately by a
service technician or author-
ised person
Grease machine According to description (see Chap. 9.5 on p. 62)
Check mechanical machine parts yearly
Request service technician or
authorised person
Clean belt straps According to description (see Chap. 9.1 on p. 54)
Check belt straps and replace if nec-
essary
According to description
Request service technician or
authorised person
DGUV Roule 3 examination (or appli-
cable national regulation)
See DGUV Roule 3
Request service technician or
authorised person
Examination according to IndSafReg
§10 (2) (or according to national reg-
ulation)
Time limits according to § 3
Section 3 (Risk assessment) Request service technician or
authorised person
BSM 631 / BSM 800 / BSM 1000