RIEXINGER BSM 1000, Руководство по эксплуатации

Страница: 56 / 86

54 9. Maintenance
Before every maintenance activity (except for examination of safety equipment)
1) If a workpiece is still in the machine, remove it (see Chap. 7.8 on p. 38).
2) Place the saw bow in the lowest position.
3) Turn the machine off at the main switch, and ensure it is not activated again.
After every maintenance activity
Record performed activities (except cleaning) in the maintenance protocol (see Chap. 9.7 on p.
66).
9.1 Cleaning the machine
Attention!
Do not used compressed air to clean the machine!
Compressed air blows shavings and dust into the machine guides, bearings and
electrical equipment. The machine may be damaged as a result.
Attention!
Plastic waste contaminates the environment!
Dispose of all shavings and plastic waste according to locally applicable legal
stipulations.
Pos. Description
1 Guide roll
2 Saw band
3 Guide roll
Fig. similar
BSM 631 / BSM 800 / BSM 1000