1 General Information
1.1 Wireless passive infrared detector «Pyrone-4RK» (hereinafter,
the Detector) is intended for detecting intrusion into a protected
premises, with generation of alarm messages via wireless two-way
communication channel within the 433.05
—
434.79 MHz frequency
range by the «Rielta-Contact-R» protocol.
1.2 The Detector is intended to operate as a component of any
control panel (hereinafter, CP) supporting «Rielta-Contact-R» wireless
two-way communication protocol.
1.3 The Detector is powered by one lithium power-supply battery
CR123A type.
1.4 The Detector comprises two-color (red and green) LED indicator
for the Detector operation control, providing possibility of LED indication
disabling.
1.5 For choosing the sensitivity level, the Detector comprises a
DIP-switch. «Reset» contacts ensure the Detector changeover to the
«Binding» mode.
1.6 The Detector ensures generation and transmission of seven
messages types about the following modes and events:
- Normal state;
- Alarm;
- Tampering;
- Battery discharge;
- Operation in «Binding» mode;
- Operation in «Identification» mode;
- Quality of communication.
1.7 Radio exchange sessions are initiated by the Detector with the
following rates: 10, 15, 30 sec, 1, 5, 10 min. Session rate is assigned
during the Detector adjustment procedure. «Alarm» and «Tamper»
messages are transmitted immediately.
1.8 The Detector is designed to operate continuously around the
clock.
1.9 The Detector has immunity to movement of:
а) secondary prototype unit (mouse);
b) fancy breed cat or dog with weight up to 10 kg moving on the
floor within the detection zone at the distance not less than 2 m from
the Detector;
c) medium-sized dog with weight up to 20 kg moving on the floor
within the detection zone at the distance not less than 2 m from the
Detector;
d) long-hair animals with weight up to 40 kg with temperature
contrast 6
о
С.
1.10 The detector has the ability to change the sensitivity, which is
adjusted in accordance with the protocol «Rielta-Contact-R».
1.11 The Detector ensures with standability to electromagnetic
interferences.
2 Features
- Dual-element pyrodetector.
- Distortions prevention in the detection zone by means of spherical
lens.
- Protection against ingress of insects to the pyrodetector.
- Changing pet immunity mode via the radio protocol.
- Thermal compensation of detecting ability.
- Automatic switching to a backup operating frequency in case of
an imperfect interference situation on the main one.
3 Specifications
Table 1
Parameter
Value
Detection zones
8 long-range zones,
4 short-range zones
Maximum detection range, not less than
10 m
Current consumption, no more than
20
μ
A
Recommended installation height
2.3 ± 0.1 m
Detection zone size
10 m x 10 m
Detected speed range
0.3 ... 3 m/sec
Operating temperature
from minus 20
0
C to +55
0
C
Permissible humidity at a tempe25
0
С
98 %
IP rating
IP41
Dimensions, maximum
90 х 60 х 50 mm
Weight, maximum
0.1 kg
Battery life (under normal climatic conditions and with a
radio exchange period equal to at least 60 sec)
8 years
Average service life
8 years
4 Field of Application
The Detector can be installed in apartments, as well as in shops,
offices, museums and industrial facilities. The Detector may be installed
in premises that are inhabited by pets weighing up to 40 kg (20 kg).
5 Detection zone Pattern
WIRELESS PASSIVE INFRARED
DETECTOR
«Pyrone-4RK»
Installation Guide
6 Scope of Delivery
Each Detector unit package contains the items listed in Table 2.
Table 2
Name
QNT
Wireless passive infrared detector «Pirone-4RK»
Swivel bracket
СR123A lithium power supply battery
Wireless passive infrared detector «Pirone-4RK». Installation Guide.
1 pc.
*
1 pc.**
1 copy
* Supplied optionally
** Installed
7 Design
The detector consists of a cover (1) with a printed circuit board (the
PCB) (2) and a base.
The cover with a PCB is shown in Fig. 2 a).
The PCB comprises:
- RESET contacts (3);
- tamper sensor (4);
- battery holder (5);
- lithium battery CR123A (6) with an insulator.
The base (Fig. 2 b) comprises:
- hole for mounting the base to the swivel bracket (7);
- wall mounting holes (8);
- PCB latches (9)
- corner mounting holes (10);
- holes for wall tamper latch (11);
- hole for cover lock (12).
0
90
о
10 m
10 m
2,3 m
Top view
Side view
Figure 1
а) a cover with a PCB
б) the basе
RESET
+
_
2
1
3
4
5
6
8
10
8
11
10
11
9
12
9
7
Figure 2 -
«Pyrone-4RK»
Design
8 LED Indication
Table 3
Detector State
LED Indication
LED status
Operation mode
«Binding»
LED indicator blinks green
«Alarm»*
LED indicator lights red for at least
0.5 sec
if indication is enabled
«Identification»
LED indicator blinks red and green
alternately at 1 Hz frequency
by a command from
the CP
«Connection quality»
See «Communication Quality Appraising»
Binding procedure
completed
LED indicator lights red for 2 sec
* Alarm indication is deactivated 15 minutes after the Detector cover is closed and activated
after it has been opened or by a command from the CP.
