Riello Wired Touch panel, Инструкция пользователя, Страница: 15 / 20

15
USE
Set required deflector position as follows:
• Activation
— press to enter the function cycle
— work on until the intermittent
appears
— press to confirm
The icon stay fixed.
•
If the exit angle can be set:
— press to enter the function cycle
— work on until the intermittent
appears
— press
— work on
— select required position
Each press will select a different position.
— press to confirm
•
Switch-off
— press to enter the function cycle
— work on until the intermittent
appears
— press to confirm
The icon disappears.
0
Do not manually move the deflector.
Sleep function
The Sleep function allows user to select a
time period throughout which the equip-
ment will change reference ambient tem-
perature:
— increasing it in Cooling and
Dehumidification mode
— decreasing it in Heating mode
9
In Smart mode: depending on the oper-
ating mode selected by the programme.
9
In the Sleep function, fan will decrease
its set speed by one.
• Activation
—
press to enter the function cycle
—
work on until the intermittent
appears
Control panel display shows with
the period of time.
• To set the time period:
— press
OFF icon starts blink.
— work on
— press to confirm
• Abort:
— press or
• Alternatively:
— wait 10 seconds
• Switch-off
9
The Auto Off Timer function can be set si-
multaneously with the Night function. In
this case the priority will be assigned to
the Auto Off Timer function.
9
The Auto On Timer function and the Night
function can not be set at the same time.
Energy Saving function
The appliance works by adopting energy
saving logics. The temperature setting values
are pre-setted by the program.
The Energy Saving function can be turned on
in the following modes:
— Heating
— Cooling
— Dehumidification
• Activation
— press to enter the function cycle
—
work on until the intermittent
appears
— press to confirm
The icon stay fixed.