Riello TAU UNIT OIL 28 G FLEX Скачать руководство пользователя страница 4

USER

4

PRECAUTIONS

GENERAL SAFETY INFORMATION

Do not allow children or 
infirm persons to operate 
the boiler unsupervised.

Do not operate any electri-
cal devices or equipment, 
including switches or domestic 
appliances, etc., if you can smell 
fuel or fumes. If you detect any suspicious smells:

- Ventilate the room by opening all doors and win-

dows.

-  Close the fuel shut-off cock.
-  Report the fault immediately to the 

r

 Technical 

Assistance Service or a professionally qualified 
heating engineer.

Never clean the boiler without first disconnecting it 
from the mains electricity supply by turning the main 
power switch OFF.

Never pull, disconnect, or twist the electrical cables 
coming from the boiler even if it is disconnected 
from the mains electricity supply.

Do no obstruct or restrict the vents in the room 
where the appliance is installed. Adequate ventila-
tion is essential for correct combustion.

Do not leave flammable substances or containers 
in the room where the boiler is installed.

Do not touch the boiler when 
barefoot or wet.

Do not switch the boiler off 
if outside temperature drops 
below ZERO (risk of freez-
ing).

This instruction manual and that for the installer 
and Technical Assistance Service are integral parts 
of the boiler. They must be kept safe and must 
ALWAYS accompany the boiler, even if it is sold 
to another owner or user or transferred to anoth-
er installation. If you damage or lose this manual, 
order a replacement immediately from your local 

r

 Technical Assistance Centre.

The boiler must be installed 
by a legally qualified heat-
ing engineer. On comple-
tion of the installation, the 
heating engineer must 
issue the owner with a 
declaration of conform-
ity confirming that the 
installation has been com-
pleted to the highest standards in 
compliance with the instructions provided by 

r

 

in this instruction manual, and that it conforms to all 
applicable laws and standards.

If you notice any water leaking from the boiler, dis-
connect it immediately from the mains electricity 
supply, shut off the water supply, and notify your 
local 

r

 Technical Assistance Centre or a quali-

fied heating engineer immediately.

Periodically check that oper-
ating pressure in the water 
circuit is 

over 1 bar

. If water 

pressure is consistently low, 
contact 

r

’s Technical 

Assistance Service or a pro-
fessionally qualified heating 
engineer.

If the boiler is not going to be used for an extended 
period of time, proceed as follows to prepare it for 
shut-down.

- Turn the mains power switch OFF.
- Close the fuel cock and heating circuit water cock.
- Drain the central heating circuit if there is any risk 

of freezing.

The boiler must only be used for the purpose speci-
fied by 

r

 and for which it is designed. The man-

ufacturer declines all responsibility, contractual or 
other, for damage to property or injury to persons 
or animals caused by improper installation, adjust-
ment, maintenance or use.

The operation of any appliance that uses electrical power demands that a number of fundamental safety precautions 
be respected.

Содержание TAU UNIT OIL 28 G FLEX





















Отзывы: