Installation
21
20052068
GB
4.9
Burner closing
Once the combustion head adjustment is completed:
➤
push the burner on the sliding bars 3) at approximately 4” from
the pipe coupling 4) - burner in the position shown in Fig. 17;
➤
insert the electrode cable, then slide the burner as far as the
pipe coupling - burner in the position shown in Fig. 18;
➤
unscrew the 2 screws 2) from the extension 5) and reposition
them as previously Fig. 18.
➤
refit the screws 2) on the sliding bars 3);
➤
fix the burner to the pipe coupling with the screws 1).
Screws
2
Screws
3
Sliding bars
4
Pipe coupling
5
Extension sliding bars
6
Lifting rings
WARNING
When fitting the burner on the two sliding bars,
it is advisable to gently draw out the high volt-
age cable until it is slightly taut.
4"
2
5
3
1
4
Fig. 17
D10445
6
5
5
6
6
Fig. 18
D10446
