Riello RS 160/EV O2 BLU, Инструкции по установке, использованию и обслуживанию

Страница: 26 / 60

20156417 24 GB
Installation
5.9 Burner closing
Once the combustion head adjustment is completed:

reassemble the burner on the guides 3) at about 100 mm
from the pipe coupling 4) - burner in the position shown in
Fig. 16;

insert the probe and electrode cables, then slide the burner
as far as the pipe coupling - burner in the position shown in
Fig. 19;

connect the socket of the maximum gas pressure switch;

refit the screws 2) on the guides 3);

fix the burner to the pipe coupling with the screws 1).
WARNING
When fitting the burner on the two guides, it is
advisable to gently draw out the high voltage
cable and flame detection probe cable until they
are slightly taut.
5
1
4 3 2
20113906
Fig. 19