Riello RS 1300/E C01, Инструкции по установке, использованию и обслуживанию

Страница: 22 / 56

20089387 20 GB
Installation
5.9 Access to head internal part
In order to reach inside the combustion head (Fig. 16) proceed as
follows:

disconnect the gas servomotor socket 1)

disconnect the electrical connection from the gas pressure
switch 2);

remove the 4 fixing screws 3)

open the burner partially (approx. 150 mm) on the hinges;

disconnect the cable of the pilot electrode 4);

open the burner fully;

extracting the inner part of the head 6), after unscrewing the
screws 5) that block it to the pipe coupling.
5.10 Electrode positioning
Fig. 16
20094552
WARNING
Place the electrode on the ignition pilot observing
the indications in Fig. 17.
Elettrodo
Diffusore
Fig. 17
20094554
Electrode
Diffuser