Riello NetMan, Руководство пользователя, Страница: 9 / 24

ENGLISH
9
SOFTWARE SETUP
To establish the communication within the NetMan card and this product, please connect
to the NetMan trough either serial port or telnet client and enable sensors (please refer to
the NetMan user’s manual) and proceed as described in the following steps.
/------------------------/
/ PVI
Network card /
/------------------------/
IP config......:
Time setting...:
PVI config.....:
Feeding config.:
Services 1.....:
Services 2.....:
<--
Security.......:
Save and load..:
Press [Esc] to quit
Version S1.12p1 - Data from flash -
Communication lost
/------------------------/
/ Services 2 /
/------------------------/
WakeOnLan addr.:
WakeOnLan delay:
Activation 2...:
Sensors Config.:
<--
I/O Sensors....:
Press [Esc] to quit
Version S1.12p1 - Data from flash -
Communication lost
STEP 1: Enter the “Services 2” menu STEP 2: Enter the “Sensor Config” menu
Sensors Devices
Press [C] to change sensors, [E] to exit
Sensors Devices
[1] A/D Converter (2600000013DF1E20)
+ 4 A/D Converter
[2] Dummy
Press [Y] to confirm, [N] to insert a new sensor
STEP 3: Press ‘C’ to force the NetMan to scan the 1-Wire bus
for sensors
STEP 4: 2 out of 6 channels are occupied by this device, hence a
dummy placeholder device appears with the A/D Converter.
Confirm the bus scan by pressing ‘Y’
/------------------------/
/ PVI Network card /
/------------------------/
IP config......:
Time setting...:
PVI config.....:
Feeding config.:
Services 1.....:
Services 2.....:
Security.......:
Save and load..:
<--
Press [Esc] to quit
Version S1.12p1 - Data from flash -
Communication lost
/------------------------/
/ Save and load /
/------------------------/
Save changes...:
<--
Revert changes.:
Load from file.:
Save to file...:
Netboot........:
Reset default..:
Press [Esc] to quit
Version S1.12p1 - Data from flash -
Communication lost
STEP 5: Go back to the main menu and enter the “Save and load
menu”
STEP 6: save changes: NetMan will reboot.