Riello KV 130 - 30 ISC, Руководство по установке и обслуживанию

Страница: 18 / 56

20
40 60 80
100
4
3 2 1
0
0 120
1 2 3 5 4 6 7 8 9
1 Boiler pressure gauge
Displays the pressure in the central heating circuit.
2 Storage cylinder temperature selector (NOT USED)
.
The temperature of the domestic hot water is preset to 44°C in the factory.
The thermostatic mixer valve has to be adjusted to change this value (see page
38).
3 Green LED
When lit, shows that a flame is being detected.
4 Two figure digital display
Displays information on boiler status.
5
Red LED
When lit, shows that an error (alarm) condition has been detected.
6 Function selector
0
Off / Reset
{
Winter mode
}
Summer mode
7 Central heating temperature selector
/
Allows you to set the temperature of the central heating water.
8 Storage cylinder temperature gauge
Displays domestic hot water temperature.
1 .13 Control panel
THE MAIN CONTROL PANEL
18
GENERAL