Riello G5R MC, Инструкции по установке, использованию и обслуживанию

Страница: 3 / 28

1
20013743
GB
TECHNICAL DATA
BURNER DESCRIPTION
O
Burner with CE marking in conformity with EEC Directives: EMC 2004/108/EC, Low Voltage 2006/95/EC,
Machines 2006/42/EC.
O
The burner meets protection level of IP 40, EN 60529.
HYDRAULIC JACK OPERATION 7)(Fig. 1)
TYPE 447T1
Thermal power – output 28 – 60 kW – 2.3 – 5 kg/h
Fuel
Light oil, viscosity 4 – 6 mm
2
/s at 20 °C
(Hi = 11.86 kWh/kg)
Electrical supply Single phase, 230 V
±
10%
~
50Hz
Motor Run current 0.75 A – 2800 rpm – 294 rad/s
Capacitor 4

F
Ignition transformer Secondary 8 kV – 16 mA
Pump Pressure 7 – 15 bar
Absorbed electrical power 0.185 kW
It is strongly recommended a periodic check of the pump pressure operation (annually or better every six
months, if the burner operation is continuous).
If the value is lower than 1 bar, compared to that one of the initial setting, please check the cleaning of the
pump and line filters.
In case the pressure setting was not restorable, please replace the pump, in order to guarantee that the
pump pressure during the pre-purge time is at least 3.7 bar.
1
– Return line
2
– Suction line
3
– Gauge connection
4
– Pump pressure regulator
5
– Vacuum gauge connection
6
– Screws fixing air damper
7
– Hydraulic jack with air damper
8
– Lock-out lamp and reset button
9
– Flange with insulating gasket
10
– Combustion head adjustment screw
Fig. 1
5
D4645
1 2 4 3
6
6
7
9
10 8
DANGER