Riello AARIA PRO AMC P, Инструкция пользователя, Страница: 11 / 24

11
USE
2 USE
2.1 Initial settings
The remote control was designed to ensure user-friendliness
even with no special programming.
To activate, just install batteries and set current time.
Battery insertion
The remote control is powered by two AAA batteries (1.5 V) housed
at the back, under a cover.
Should you notice a poorer reception or if display information
fades out, the batteries must be changed.
To fit or change batteries:
— remove the cover by pressing it down and lifting it up
— if present, remove old batteries
— fit new batteries according to proper polarity
9
Two 1.5V AAA batteries are supplied with the unit for its first
set-up.
9
Never mix and match new and old batteries or different
types of batteries.
9
When you remove the batteries, all settings in the remote
control will be deleted. Fit the new batteries and reprogram.
9
Do not dispose of old batteries in the environment. Always
take them to the suitable containers at points of sale.
time setting
The current time must be set before using the remote control:
— open the door
— press
—
work on
— select the current time
Each time the key is pressed, the values changes by 1. by keeping
the key pressed down, the value changes faster.
— confirm with
2.2 Start-up
To switch on:
ON
OFF
— position the system's main switch in the "ON" position.
— press
The unit display turns on.
9
Use the remote control within a range of 7 meters, pointing
it towards the receiver and making sure that there are no
obstacles interposed.
9
The working range could be reduced if electronic starters or
TV sets are nearby.
9
Do not leave the remote control exposed to direct sunlight,
near sources of heat and protect it from water and dust.
9
The remote control is equipped with 1.5 V AAA batteries that
must be removed when climate control system is left un-
used for over 3 months.