The boiler door hinges are factory fitted on the right of the door. If opting to open the door from right to left, rotating on
the hinges placed on the left, perform these operations:
23
CHANGING THE DIRECTION OF DOOR OPENING
1
2
4
5
3
1
6
8
7
1
1
1
1
1
1
1
6
8
7
1
- Make sure that the main door fixing bolts (1) are
securely tightened.
- Remove the top safety bolts (2) and the door stop
bracket (3).
- Remove the bottom safety bolts (4) and the door
stop bracket (5).
- Fit the bushing (8), bolt (6) and washer (7) to the
opposite side of the door.
b
If the insertion of the washer (7) or the tightening
of the bolt (6) on the bushing (8) is difficult
due to insufficient door alignment,
affix it to a
proper size hoist
(refer to the weights and
dimensions table),
loosen the locking screws
only slightly
(1) to allow the lifting of the door
and facilitate the insertion of the washer (7) or
- Insert a spanner through the slot in the side of the
top door mounting bracket and hold the bushing (5)
steady.
- Unscrew the top bolt (6), then remove the bushing
(8) and washer (7).
align the hole on the door to the hinge sleeve.
Once the bolt (6) has engaged its hole,
re-tighten the door fixing bolts (1).
INSTALLER
