Riello UPS Sentinel RT 10000 VA ER, Руководство пользователя

Страница: 37 / 42

37
A
LARM CODES
Using a sophisticated self-diagnosis system, the UPS is able to check its own status and any anomalies and/or faults which
may occur during normal operation and display them on the display panel. If there is a problem, the UPS signals the event
by showing the code and the type of active alarm on the display (FAULT and/or LOCK).
Warning
➢
Alarms: these are more critical problems than anomalies because, if they persist, they could cause the UPS to
lock in a very short time.
CODE DESCRIPTION
A62
Battery unconnected
F04
Over temperature
F50
Overload
F60
Overcharge
F68
Low battery
F69
Fan failure
F70
Charger failure
F74
Locked in bypass after overload 3 times in 30min
F75
Cover of maintain switch is open
F76
Bypass unstable
F77
Boot loader is missing
F79
Over temperature on Transformer box
C01
EPO enable