12
1200 Series SmartPanels 1.0 User Manual
0
1
-0
0
0
H
B
0
3
E
G
-A1
0
2.7.1
Transport
The menu
Transport
allows selecting the protocol that is used to connect the SmartPanel with a matrix.
Info-display
Function
Current Mode:
Shows the current used mode.
Selected Mode:
Selection of the mode to be used:
Auto
The SmartPanel selects the mode automatically to establish a successful
connection to a matrix.
AES3 Cat
The SmartPanel establishes a connection via RJ45 matrix connector.
AES3 Coax
The SmartPanel establishes a connection via BNC matrix connector.
AES67
The SmartPanel established a connection via the Ethernet-port defined
for using AES67 (see panel-menu:
Network>AES67: Media-Port
).
2.7.2
Brightness
The menu
Brightness
allows adjusting the display and LED brightness between 10% and 100%.
Info-display
Function
Display Brightness:
Adjusting the brightness of the displays.
LED Brightness:
Adjusting the brightness of the key rings.
2.7.3
Device-Info
The menu
Device-Info
shows information about the SmartPanel.
Info-display
Function
Date:
Shows the current date.
FW Version:
Shows the current firmware version.
SN#:
Shows the serial number of the SmartPanel.
2.7.4
Network
The menu
Network
allows showing/editing network settings.
The menu
AES67
allows configuring the AES67 interface.
Info-display
Function
IP Address
Static IP-address of the AES67-port.
Subnet Mask
Network mask of the AES67-port.
Gateway
Gateway of the AES67-port.
SIP Port
Selection of the SIP-port. (Standard 5060)
Media Port
Selection of the Ethernet-port (ETH1...4) that is connected to the AES67 network.
2.7.5
Matrix
The menu
Matrix
shows information about the connected Matrix.
Content is only available if the SmartPanel is connected with a Matrix.
figure 14: Matrix
Display
Function
Net
Net number of the connected matrix.
Node
Node number of the connected matrix.
Bay
Bay number of the connected matrix.
Port
Port number of the connected matrix.
Room
Shows the Room code (if applied).
Name
Name of the SmartPanel.
Firmware-Version
Current version of the firmware of the connected matrix.
Bootloader-Version
Current version of the Bootloader of the connected matrix.
Emergency-Version
Current version of the Emergency-firmware of the connected matrix.
CurAPi
Shows the active audio patch.
PAN
Number of the panel in the Artist.
Alarm
Number of alarms in the connected matrix.
Node IP
IP-address of the connected matrix.
OnCall
Number of incoming calls to the SmartPanel that are active when the matrix menu is
opend.
Datum
Shows the current date of the connected matrix.
Uhrzeit
Shows the current time of the connected matrix..
MIC conf
The microphone setting of the panel can be changed between
dynamic
and
electret
by using the lever key 29.
HS conf
The microphone setting of the headset can be changed between
dynamic
and
electret
by using the lever key 31.
Key in the Info-display to return to the parent menu item.
Key in the Info-display to return to the main view.
