Riedel NSA-002A, Руководство пользователя

Страница: 6 / 28

6
NSA-002A User Manual A00
1.2 Safety Instructions
Voltage
·
The power cable should only be connected to a correctly grounded source.
·
Do not use any adapters.
·
Never bypass a ground contact.
Caution
!
·
To shut down the unit completely, remove the power cord and both Ethernet cables.
·
Pour éteindre complètement l'appareil, débranchez le cordon d'alimentation et les deux
câbles Ethernet.
Warning
!
·
Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
·
Apparatet må tilkoples jordet stikkontakt.
·
Apparaten skall anslutas till jordat uttag.
·
Apparatets stikprop skal tilsluttes en stikkontakt med jord som giver forbindelse til
stikproppens jord.
Danger
!
To reduce the risk of electric shock do not remove cover or expose the products to
rain or moisture.
Service
·
All service has to be undertaken only by qualified Riedel service personnel.
·
Do not plug in, turn on or attempt to operate an obviously damaged device.
·
Never attempt to modify the equipment components for any reason.
Caution
!
All adjustments have been done at the factory before the shipment of the devices. No
maintenance is required and no user serviceable parts are inside the module.
Environment
·
Never place the devices in areas of high dust particles or humidity.
·
Be aware of the operating temperature of the systems (0°C – +50°C).
·
Never place containers with any liquids on top of the devices.
·
If the equipment has been exposed to a cold environment and transferred to a warm environment,
condensation may form inside the housing. Wait at least 6 hours before applying any power to the
equipment.