Riedel Bolero 2.0, Руководство пользователя

Страница: 104 / 130

104
Bolero 2.0 User Manual
4.4.7.2 Edit (Audio Channels)
Clicking the Edit symbol opens a dialog to edit audio channels on several pages. The selected page is underlined.
The dialog can be closed by pressing the ESC key without saving any changes.
Apply Stores all changes.
Apply & Close Stores all changes and closes dialog.
Cancel Discards all changes.
Figure 141: Edit (Audio Channels)
General
Name User configurable name of the audio channel.
Enabled Slider to enable/disable the audio channel.
Mute Input *1 Slider to mute the input signal.
Mute Output
*2
Slider to mute the output signal.
Input Gain
*1
Slider to adjust the input gain: -12 ... 0 ... +12 dB
Output Gain
*2
Slider to adjust the output gain: Mute: -60 ... 0 ... +12 dB
Priority Dim
*2
Slider to adjust the dim level of priority calls: Mute, -72 ... -20 ... 0 dB
*1
audio inputs and 4-wire only
*2
audio outputs and 4-wire only
Always-On
Function
to add Up to 5 functions can be configured, that are permanently activated.
Talk (Low/High Prio)
*1
Calling a destination.
Listen (Low/High Prio)
*2
Monitoring a source.
Set Trigger Setting a GPIO output (physical/virtual).
Destination Defines the destination depending on the selected function.
Talk (Low/High Prio)
Listen (Low/High Prio Destination (or source) of calls:
·
present Partylines
·
present Beltpacks
·
present Audio Channels
Set Trigger GPIO outputs to be switched (physically/virtual):
·
Define Output/Virtual Trigger
·
Create Virtual Trigger
A function can be deleted by clicking the trash button.
*1
audio inputs and 4-wire only
*2 audio outputs and 4-wire only