User Manual Acrobat V3.30 Rev1.0
3.1.5
Display
3.1.5.1
Display elements during operation mode
For version 3.31.1, the display shows the following elements in operation mode.
Signal (RF)
strength
FN Key 1
FN Key 2
Partyline
CHAN_A
Partyline
CHAN_B
Battery
capacity
Microphone
type
CA-6 No.
(RPN)
Figure 2: Display elements
Display Element
Description
Signal strength
Displays the current incoming signal (RF) strength which was
received by the Cell Antenna CA-6 . Less than 5% are
signaled by a none-colored RF symbol.
81 - 100%
61 - 80 %
41 - 60 %
21 - 40 %
6 - 20 %
0 - 5 %
CA-6 No. (RPN)
Displays the RPN (Radio Part Number) of the CA-6 by which
the WB-2 is communicating with.
Mic type
Displays the configured type of microphone (see setting of
DIP switch #5 or service menu).
"D" for Dynamic , "E" for Electret microphones
Battery capacity
Displays the current battery capacity in 20% steps. Less
than 4% are signaled by a none-colored battery symbol
(100% = 8.2 V … 0% = 6.5V).
81 - 100 %
61 - 80 %
41 - 60 %
21 - 40 %
5 - 20 %
0 - 4 %
FN Key 1
Soft labeling of the FN Key 1. In operation mode labeled
with "CALL".
Partyline CHAN_A
Displays the name of the associated partyline of CHAN_A.
Partyline CHAN_B
Displays the name of the associated partyline of CHAN_B.
FN Key 2
Soft labeling of the FN Key 2. In operation mode labeled
with "SCALL".
Page 11
