RIDGID SeeSnake Compact M40 Скачать руководство пользователя страница 13

Compact 

M40 – English – 13

Maintenance and 

Support

Cleaning

Clean your system with rags and a soft 
nylon brush. If desired, a mild detergent or 
disinfectant can be used. Do not use sol-
vents or high pressure water to clean any 
part of the system.

Maintaining Components

Camera Head

Scratches on the camera have a minimal ef-
fect on its performance. Do not use scraping 
tools or sand the camera to remove scratch-
es.

Push Cable

Run a rag over the push cable and visually 
inspect it for cuts and abrasions while push-
ing it back into the drum. Replace or repair 
the push cable if the outer jacket is cut or 
abraded. 

Storage

The Compact M40 must be stored in a 
dry, secure area between -10°C and 70°C 
[14°F and 158°F]. Store your equipment in a 
locked area out of the reach of children and 
people unfamiliar with its purpose. 

Support

For support and additional information 
about using your system, visit 

support.

seesnake.com/compact-m40/

.

Service and Repair

Improper service or repair can cause the 
camera reel to be unsafe to operate.

Service and repair of the camera reel must 
be performed at a RIDGID Independent 
Authorized Service Center. To find your 
nearest service center or for any service or 
repair questions:

•  Contact your local RIDGID distributor.

•  Visit RIDGID.com.

•  Contact Ridge Tool Company 

Technical Service Department at 
[email protected] or, in 
the USA and Canada, call 1-800-519-
3456.

Disposal

Parts of your system contain valuable mate-
rials that can be recycled. There are compa-
nies that specialize in recycling that may be 
found locally. Dispose of the components in 
compliance with all applicable regulations. 
Contact your local waste management au-
thority for more information.

EC Countries:

 Do not dispose 

of electrical equipment with 
household waste! 

According to the Europe-
an Guideline 2012/19/EU for 
Waste Electrical and Electronic 
Equipment and its implemen-
tation into national legislation, 
electrical equipment that is no 
longer usable must be collect-
ed separately and disposed of 
in an environmentally correct 
manner. 

Battery Disposal
EC Countries:

 Defective or used batteries 

must be recycled according to the guideline 
2006/66/EEC.

Содержание SeeSnake Compact M40

















Отзывы: