6 — English
WARNING:
Do not allow familiarity with products to make
you careless. Remember that a careless fraction
of a second is sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields
marked to comply with ANSI Z87.1, along with
hearing protection. Failure to do so could result
in objects being thrown into your eyes resulting
in possible serious injury.
WARNING:
Do not use any attachments or accessories
not recommended by the manufacturer of this
product. The use of attachments or accessories
not recommended can result in serious personal
injury.
APPLICATIONS
You may use this product for the purposes listed below:
Clearing hard surfaces such as driveways and walkways
Keeping jobsite area free from residual dusts and other
light debris
Inflating large and small inflatables.
Quickly deflating items
TO INSTALL/REMOVE BATTERY PACK
See Figures 4 and 5, pages 9 and 10.
WARNING:
Always remove battery pack from your tool
when you are assembling parts, making adjust-
ments, cleaning, or when not in use. Removing
battery pack will prevent accidental starting that
could cause serious personal injury.
ASSEMBLY
OPERATION
ASSEMBLING THE BLOWER TUBE
See Figure 1, page 9.
Align the tabs inside the blower tube with the slots on the
blower outlet.
Push the blower tube onto the blower outlet until it stops.
Turn the blower tube clockwise until it is securely
attached.
To remove the blower tube, turn it counterclockwise until
it stops and slide the blower tube off.
INSTALLING THE INFLATOR/DEFLATOR
NOZZLE
See Figures 2 - 3, page 9.
To use this tool as an inflator or deflator instead of a blower,
remove the blower tube and install the inflator/deflator
nozzle. For inflation, install the nozzle on the blower outlet.
For deflation, install the nozzle on the air intake.
To use the tool as an inflator:
Remove the blower tube from the blower outlet.
Align the tabs inside the inflator/deflator nozzle with the
slots on the blower outlet.
Push the inflator/deflator nozzle onto the blower outlet
until it stops.
Turn the inflator/deflator nozzle clockwise until it is
securely attached.
To remove the inflator/deflator nozzle, turn it counter-
clockwise until it stops and slide the nozzle off.
To use the tool as a deflator:
Remove the blower tube from the blower outlet.
Align the raised ribs on the inflator/deflator nozzle with
the notches on the air intake.
Push the inflator/deflator nozzle onto the air intake.
To remove the inflator/deflator nozzle, pull it away from
the air intake.
To use the tool as a blower:
Remove the inflator/deflator nozzle.
Install the blower tube onto the blower outlet as described
previously.
