RIDGID R855 Скачать руководство пользователя страница 22

22

BATTERY PACK REMOVAL AND PREPARATION 
FOR RECYCLING

To preserve natural resources, please 
recycle  or  dispose  of  batteries 
properly.
This  product  contains  lithium-ion  
batteries. Local, state or federal laws 
may  prohibit  disposal  of  lithium-ion 
batteries in ordinary trash.

Consult your local waste authority for information regarding 
available recycling and/or disposal options. 

WARNING:

Upon removal, cover the battery pack’s terminals 
with heavy-duty adhesive tape. Do not attempt to 
destroy or disassemble battery pack or remove any 
of its components. Lithium-ion batteries must be 
recycled or disposed of properly. Also, never touch 
both  terminals  with  metal  objects  and/or  body 
parts as short circuit may result. Keep away from 
children.  Failure  to  comply  with  these  warnings 
could result in fire and/or serious injury.

MAINTENANCE

WARNING:

When  servicing  use  only  identical  RIDGID 
replacement  parts.  Use  of  any  other  parts  may 
create a hazard or cause product damage.

WARNING:

Always wear safety goggles or safety glasses with 
side shields during power tool operation or when 
blowing  dust.  If  operation  is  dusty,  also  wear  a 
dust mask.

WARNING:

To  avoid  serious  personal  injury,  always  remove 
the battery pack from the tool when cleaning or 
performing any maintenance.

GENERAL MAINTENANCE

Avoid  using  solvents  when  cleaning  plastic  parts.  Most 
plastics are susceptible to damage from various types of 
commercial solvents and may be damaged by their use. Use 
clean cloths to remove dirt, dust, oil, grease, etc.

WARNING: 

Do  not  at  any  time  let  brake  fluids,  gasoline, 
petroleum-based products, penetrating oils, etc., 
come in contact with plastic parts. Chemicals can 
damage,  weaken  or  destroy  plastic  which  may 
result in serious personal injury.

Only the parts shown on the parts list are intended to be  
repaired or replaced by the customer. All other parts should 
be replaced at a RIDGID authorized service center.

BATTERIES

The battery pack for this tool is equipped with lithium-ion 
rechargeable batteries. Length of service from each charging 
will depend on the type of work you are doing.
The  batteries  in  this  tool  have  been  designed  to  provide 
maximum trouble-free life. However, like all batteries, they 
will eventually wear out. Do not disassemble battery pack 
and  attempt  to  replace  the  batteries.  Handling  of  these 
batteries, especially when wearing rings and jewelry, could 
result in a serious burn.
To obtain the longest possible battery life, we suggest the 
following:

  Remove the battery pack from the charger once it is fully 

charged and ready for use.

For battery pack storage longer than 30 days:

  Store the battery pack where the temperature is below 

80°F and away from moisture.

  Store battery packs in a 

30%-50%

 charged condition.

  Every  six  months  of  storage,  charge  the  pack  as  

normal.

Li - Ion

Содержание R855

























Отзывы: