10
UNPACKING
This product requires assembly.
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACKING LIST
Hammer Drill
Auxiliary Handle
Double-ended Bit
Tool Bag
Charger
Battery Pack
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate
this tool until the parts are replaced. Failure to
heed this warning could result in serious personal
injury.
WARNING:
Do not attempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteration or modification is misuse
and could result in a hazardous condition leading
to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause
serious personal injury, always remove the battery
pack from the tool when assembling parts.
ASSEMBLY
360°
ROTATION
TO
TIGHTEN
AUXILIARY
HANDLE
TO
LOOSEN
Fig. 2
INSTALLING THE AUXILIARY HANDLE
ASSEMBLY
See Figure 2.
An auxiliary handle assembly is packed with the drill for
ease of operation and to help prevent loss of control. The
handle can be rotated 360°, and it can also be mounted on
the opposite side for left hand use.
To install the auxiliary handle assembly:
Loosen the handle assembly by turning the handle
counterclockwise.
Rotate the handle assembly to the desired operating
position.
Securely tighten by turning the handle assembly
clockwise.
Be sure the handle assembly is securely tightened against
the clamp. This secures the handle assembly.
NOTE:
For convenience and ease of starting threads, the
hex nut has been trapped inside the molded slot in the
handle assembly.
