background image

10

WARNING:

Do  not  allow  familiarity  with  tools  to  make  you 
careless. Remember that a careless fraction of a 
second is sufficient to inflict severe injury.

WARNING:

Always wear safety goggles or safety glasses with 
side shields when operating tools. Failure to do so 
could result in objects being thrown into your eyes 
resulting in possible serious injury.

WARNING:

Do  not  use  any  attachments  or  accessories 
not  recommended  by  the  manufacturer  of  this 
tool. The use of attachments or accessories not 
recommended  can  result  in  serious  personal 
injury.

OPERATION

UNPACKING

This product has been shipped completely assembled.

  Carefully remove the tool and any accessories from the 

box. Make sure that all items listed in the packing list are 
included.

  Inspect the tool carefully to make sure no breakage or 

damage occurred during shipping.

  Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the tool.

  If  any  parts  are  damaged  or  missing,  please  call  

1-866-539-1710 for assistance.

PACKING LIST

18V Jig Saw
T-Shank Saw Blades (2)
Anti-Splintering Insert
Battery Pack
Charger
Operator’s Manual

ASSEMBLY

WARNING:

If any parts are damaged or missing do not operate 
this  tool  until  the  parts  are  replaced.  Failure  to 
heed this warning could result in serious personal 
injury.

WARNING:

Do  not  attempt  to  modify  this  tool  or  create 
accessories  not  recommended  for  use  with  this 
tool. Any such alteration or modification is misuse 
and could result in a hazardous condition leading 
to possible serious personal injury.

WARNING:

To  prevent  accidental  starting  that  could  cause 
serious personal injury, always remove the battery 
pack from the tool when assembling parts.

APPLICATIONS

You may use this tool for the purposes listed below:

  Cutting all types of wood and wood products

  Cutting thin sheet metal

  Cutting plastics and laminates

CAUTION:

If at any point during the charging process none 
of the LEDs are lit, remove the battery pack from 
the charger to avoid damaging the product. DO 
NOT insert another battery. Return the charger and 
battery to your nearest service center for service 
or replacement.

CAUTION:

Charge  in  a  well  ventilated  area.  Do  not  block 
charger  vents.  Keep  them  clear  to  allow  proper 
ventilation.

Содержание R8433





















Отзывы: