background image

19

MAINTENANCE

KEEPING THE CHARGER VENTS CLEAN

The fan in this charger will perform more efficiently if the air 
vents and ports are kept clean and dust-free. Periodically 
check the air vents for dust or other debris.
To clean the vents, unplug the charger. Using a fine nylon-
bristle brush, whisk dust or debris away from the air vents 
and ports. 
The battery pack has intake and exhaust vents that should 
also be kept free of dust and debris. Clean the battery pack 
vents by using a fine nylon-bristle brush to whisk away dust 
or debris. 
When cleaning, do not allow metal to come into contact with 
any of the vents or ports of the charger or battery pack.
BATTERIES
The battery pack for this tool is equipped with nickel-cadmium 
rechargeable batteries. Length of service from each charging 
will depend on the type of work you are doing.
The  batteries  in  this  tool  have  been  designed  to  provide 
maximum trouble-free life. However, like all batteries, they 
will eventually wear out. Do not disassemble battery pack 
and  attempt  to  replace  the  batteries.  Handling  of  these 
batteries, especially when wearing rings and jewelry, could 
result in a serious burn.
To obtain the longest possible battery life, we suggest the 
following:

n

  Remove the battery pack from the charger once it is fully 

charged and ready for use.

For battery pack storage longer than 30 days:

n

  Store the battery pack where the temperature is below 

80°F. 

n

  Store battery packs in a "discharged" condition.

BATTERY PACK REMOVAL AND
PREPARATION FOR RECYCLING

To preserve natural resources, please 
recycle  or  dispose  of  batteries 
properly.
This product contains nickel-cadmium 
batteries. Local, state or federal laws 
may  prohibit  disposal  of  nickel-
cadmium batteries in ordinary trash.

Consult your local waste authority for information regarding 
available recycling and/or disposal options. 

WARNING:

Upon removal, cover the battery pack’s terminals 
with  heavy-duty  adhesive  tape.  Do  not  attempt 
to  destroy  or  disassemble  battery  pack  or 
remove any of its components. Nickel-cadmium
batteries  must  be  recycled  or  disposed  of 
properly.  Also,  never  touch  both  terminals  with 
metal objects and/or body parts as short circuit 
may result. Keep away from children. Failure to 
comply  with  these  warnings  could  result  in  fire 
and/or serious injury.

Содержание R8411511























Отзывы: