background image

4

5

SERVICE

Tool  service  must  be  performed  only  by  qualified
repair personnel. 

Service or maintenance performed by 

unqualified personnel may result in a risk of injury.

GENERAL SAFETY RULES

When servicing a tool, use only identical replacement 
parts. Follow instructions in the Maintenance section 
of this manual.

 Use of unauthorized parts or failure to

follow  Maintenance  Instructions  may  create  a  risk  of 
shock or injury.

SPECIFIC SAFETY RULES

Know your power tool. Read operator’s manual care-
fully.  Learn  its  applications  and  limitations,  as  well 
as the specific potential hazards related to this tool. 

Following this rule will reduce the risk of electric shock, 
fire, or serious injury.

Always wear safety glasses with side shields.

 Everyday 

glasses have only impact resistant lenses. They are NOT 
safety glasses. Following this rule will reduce the risk of 
eye injury.

Protect your hearing. Wear hearing protection during 
extended periods of operation. 

Following this rule will 

reduce the risk of serious personal injury.

Keep hands out of the plunger and plunger rod area 
of the caulk gun. 

Fingers can be pinched between the 

tube holder and the plunger.

Maintain labels and nameplates. 

These carry important 

information. If unreadable or missing, contact an autho-
rized service center for a replacement.

Battery tools do not have to be plugged into an elec-
trical outlet; therefore, they are always in operating 
condition.  Be  aware  of  possible  hazards  when  not 
using your battery tool or when changing accessories. 

Following this rule will reduce the risk of electric shock, 
fire, or serious personal injury.

Do not place battery tools or their batteries near fire 
or heat. 

This will reduce the risk of explosion and possibly 

injury.

Never use a battery that has been dropped or received 
a sharp blow.

 A damaged battery is subject to explo-

sion. Properly dispose of a dropped or damaged battery 
immediately. 

Batteries vent hydrogen gas and can explode in the 
presence of a source of ignition, such as a pilot light.

 

To reduce the risk of serious personal injury, never use 
any cordless product in the presence of open flame. An 
exploded  battery  can  propel  debris  and  chemicals.  If 
exposed, flush with water immediately. 

Do not charge battery tool in a damp or wet location.

 

Following this rule will reduce the risk of electric shock. 

For best results, your battery tool should be charged 
in  a  location  where  the  temperature  is  more  than 
50°F  but  less  than  100°F. 

Do  not  store  outside  or  in 

vehicles. 

Under extreme usage or temperature conditions, bat-
tery leakage may occur. If liquid comes in contact with 
your skin, wash immediately with soap and water, then 
neutralize with lemon juice or vinegar. If liquid gets 
into your eyes, flush them with clean water for at least 
10 minutes, then seek immediate medical attention.

 

Following this rule will reduce the risk of serious personal 
injury.

� Save these instructions. 

Refer to them frequently and 

use them to instruct others who may use this tool. If you 
loan  someone  this  tool,  loan  them  these  instructions 
also.

Содержание R84040





















Отзывы:

Похожие инструкции для R84040