8
FEATURES
Before using this tool, familiarize yourself with all operat-
ing features and safety requirements. However, do not let
familiarity with the tool make you careless.
This new drill-driver is equipped with the following features.
See Figure 1.
KEYLESS CHUCK
The drill-driver has a keyless chuck that allows you to hand
tighten or release drill bit in the chuck jaws.
SWITCH
The drill-driver has a conveniently located variable speed
switch.
SWITCH LOCK
The switch trigger can be locked in the OFF position. This
feature helps reduce the possibility of accidental starting
when not in use.
TWO SPEED GEAR TRAIN
The drill-driver has a two-speed gear train designed for
drilling or driving at LO (1) or HI (2) speeds. A slide switch
is located on top of your drill to select either LO (1) or HI
(2) speed.
FORWARD/REVERSE SELECTOR
(DIRECTION OF ROTATION SELECTOR)
The drill-driver has a forward/reverse selector located above
the switch trigger.
AUXILIARY HANDLE
This drill is equipped with an auxiliary handle for ease of
operation and to prevent loss of control.
BIT STORAGE
When not in use, bits provided with the drill-driver can be
placed in the storage area located on the rear of the motor
housing.
CHARGER
The charger has a "key hole" hanging feature for convenient,
space saving storage. Screws should be installed so that
center distances are 4-1/8 inches apart.
