RIDGID R7120, Руководство оператора

Страница: 15 / 18

15
MAINTENANCE
WARNING:
When servicing use only identical RIDGID ® replace-
ment parts. Use of any other parts may create a
hazard or cause product damage.
GENERAL
Avoid using solvents when cleaning plastic parts. Most plas-
tics are susceptible to damage from various types of com-
mercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, carbon dust, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petro-
leum-based products, penetrating oils, etc. come in
contact with plastic parts. They contain chemicals
that can damage, weaken, or destroy plastic.
Electric tools used on fiberglass material, wallboard, spack-
ling compounds, or plaster are subject to accelerated wear
and possible premature failure because the fiberglass chips
and grindings are highly abrasive to bearings, brushes, com-
mutators, etc. Consequently, we do not recommended us-
ing this tool for extended work on these types of materials.
However, if you do work with any of these materials, it is
extremely important to clean the tool using compressed air.
WARNING:
Always wear safety goggles or safety glasses with
side shields when operating this tool. Failure to do
so could result in dust, shavings, or loose particles
being thrown into your eyes, resulting in possible
serious injury.
LUBRICATION
All of the bearings in this tool are lubricated with a sufficient
amount of high grade lubricant for the life of the tool under
normal operating conditions. Therefore, no further lubrica-
tion is required.
ACCESSORIES
The following recommended accessories are currently available at retail stores:
■
Mixing Wands
■
High Speed Bits .................................................................................................................................. 1/2 in.(13 mm) Max.
■
Wood Boring Bits ............................................................................................................................ 1-1/2 in. (32 mm) Max.
■
Self Feed ....................................................................................................................................... 2-9/16 in.(65 mm) Max.
■
Auger Bit ......................................................................................................................................... 1-1/2 in.(32 mm) Max.
■
Hole Saw, Steel ................................................................................................................................ 3 in. (76.2 mm) Max.
■
Hole Saw, Wood .................................................................................................................................. 5 in. (127 mm) Max.
WARNING:
The use of attachments or accessories not listed might be hazardous.