RIDGID R4093, Руководство оператора

Страница: 21 / 112

21 — English
ASSEMBLY
INSTALLING THE MITER GUIDE
See Figure 34.
The miter guide can be used from both the left and right side
of the cutting wheel.
NOTE: The drop fence must be locked in its raised position
when using the miter guide.

Place the slot on the underside of the miter guide on the
drop fence.
 Lock the miter guide securely to the table by turning the
lock knob clockwise.
To adjust angles:
 Loosen the miter guide knob.

Set to the desired angle by rotating the guide left or right.
 Tighten the knob securely before turning on the saw.
FILLING/CHANGING THE WATER TRAY
See Figure 35.

Install drain cap.

Fill the water tray with clean tap water. Ensure the water
level is between “minimum” and “maximum” fill lines.
To change water:

Unplug the saw.

Remove the drain cap and empty waste water into a
bucket. Do not allow the water to splash onto the ground
or around the machine.

Rinse the water tray thoroughly.

Discard the waste water in accordance with local regula-
tions.

Replace the drain cap and refill tray with clean water.
NOTE: Drain fits standard size garden hose.
DRAIN CAP
Fig. 35
MAXIMUM
FILL LINE
MINIMUM
FILL LINE
WATER
RESERVOIR
Fig. 34
MITER GUIDE
KNOB
MITER
GUIDE
LOCK
KNOB
DROP
FENCE