background image

21

WARRANTY

Proof of purchase must be presented when requesting 
warranty service. 

This product is manufactured by One World Technologies, 
Inc.  The  trademark  is  licensed  from  RIDGID,  Inc.    All 
warranty communications should be directed to One World 
Technologies, Inc., attn: RIDGID Pneumatic Tool Technical 
Service at (toll free) 1-866-539-1710. 

90-DAY SATISFACTION GUARANTEE POLICY 

During the first 90 days after the date of purchase, if you are 
dissatisfied with the performance of this RIDGID

®

 Pneumatic 

Tool for any reason you may return the tool to the dealer 
from which it was purchased for a full refund or exchange. 
To  receive  a  replacement  tool  you  must  present  proof  of 
purchase and return all original equipment packaged with 
the original product. The replacement tool will be covered by 
the limited warranty for the balance of the 3-YEAR service 
warranty period. 

WHAT IS COVERED UNDER THE 3 YEAR 
LIMITED SERVICE WARRANTY 

This warranty on RIDGID

®

 Pneumatic Tools covers all defects 

in workmanship or materials and normal wear items for three 
years following the purchase date of the tool. Warranties for 
other RIDGID

®

 products may vary. 

HOW TO OBTAIN SERVICE

To obtain service for this RIDGID

®

 tool you must return it; 

freight prepaid, or take it in to an authorized service center 
for RIDGID

®

 branded pneumatic tools. You may obtain the 

location  of  the  authorized  service  center  nearest  you  by 
calling  (toll  free)  1-866-539-1710  or  by  logging  on  to  the 
RIDGID

®

  website  at  www.ridgid.com.  When  requesting 

warranty service, you must present the original dated sales 
receipt. The authorized service center will repair any faulty 
workmanship, and either repair or replace any part covered 
under the warranty, at our option, at no charge to you.

One World Technologies, Inc.

P.O. Box 35, Hwy. 8

Pickens, SC 29671

WHAT IS NOT COVERED

This warranty applies only to the original purchaser at retail 
and  may  not  be  transferred.  This  warranty  only  covers 
defects arising under normal usage and does not cover any 
malfunction, failure or defect resulting from misuse, abuse, 
neglect, alteration, modification or repair by other than an 
authorized service center for RIDGID

®

 branded pneumatic 

tools. Consumable accessories provided with the tool such 
as, but not limited to, fasteners, oil, and safety glasses are 
not covered. 

RIDGID, INC. AND ONE WORLD TECHNOLOGIES, INC. 
MAKE  NO  WARRANTIES,  REPRESENTATIONS  OR 
PROMISES AS TO THE QUALITY OR PERFORMANCE 
OF  ITS  PNEUMATIC  TOOLS  OTHER  THAN  THOSE 
SPECIFICALLY STATED IN THIS WARRANTY. 

ADDITIONAL LIMITATIONS

To  the  extent  permitted  by  applicable  law,  all  implied 
warranties, including warranties of MERCHANTABILITY or 
FITNESS FOR A PARTICULAR PURPOSE, are disclaimed.  
Any implied warranties, including warranties of merchantability 
or fitness for a particular purpose, that cannot be disclaimed 
under  state  law  are  limited  to  three  years  from  the  date 
of  purchase.  One  World  Technologies,  Inc.  and  RIDGID, 
Inc.  are  not  responsible  for  direct,  indirect,  incidental  or 
consequential damages. Some states do not allow limitations 
on how long an implied warranty lasts and/or do not allow 
the  exclusion  or  limitation  of  incidental  or  consequential 
damages, so the above limitations may not apply to you. 
This warranty gives you specific legal rights, and you may 
also have other rights which vary from state to state. 

RIDGID

®

 PNEUMATIC TOOL 3 YEAR LIMITED SERVICE WARRANTY 

Содержание R175RND























Отзывы: