Figure 1 – PowerClear Drain Cleaning Machine
Figure 2 – PowerClear Drain Cleaning Machine
Specifications
Line Capacity .............¾" – 1½" (20mm - 40mm)
Drum Capacity ...........30' (9.1m) of ¼" (6mm) Diameter
Cable
Cable..........................¼" × 30' (6mm × 9.1m)
MAXCORE™ 50 Cable
Motor Type ................Universal
Motor Ratings.............120V
230V
¼ HP
120W
0.9 Amp, 60Hz 0.5 Amp, 50Hz
See Serial Plate for Machine Specification Information.
No Load Speed (no)...450 RPM
AUTOFEED
Unit Feed Rate...........18 feet/min (5.5 m/min)
Controls......................Forward/OFF/Momentary Re -
verse Rotation Direction Control
ON/OFF Pneumatic Foot Switch
Motor Control
Advance/Retrieve Cable
AUTO FEED Unit with
Configurable Guide Hose
Operating
Temperature...............20° - 120°F (-7° - 49°C)
Weight ........................12 lbs (5,44 kg)
Dimension L×W×H .....14" x 9" x 11.5"
(356 mm x 229 mm x 292 mm)
Sound Pressure (L
PA
)* ...70 dB(A), K=3
Sound Power (L
WA
)*.......79 dB(A), K=3
* Sound measurements are measured in accordance with a standardized test per
Standard EN 62481-1.
- Sound emissions may vary due to your location and specific use of these
tools.
- Daily exposure levels for sound need to be evaluated for each application and
appropriate safety measures taken when needed. Evaluation of exposure lev-
els should consider the time a tool is switched off and not in use. This may sig-
nificantly reduce the exposure level over the total working period.
Switch Icons
Figure 3 – Machine Serial Number
The machine serial number is located on the underside of
the housing. The last 4 digits indicate the month and
year of manufacture. (MM = month, YY = year).
This machine is made to clean drains. If prop-
erly used it will not damage a drain that is in good condi-
tion and properly designed, constructed and maintained.
If the drain is in poor condition, or has not been properly
designed, constructed and maintained, the drain cleaning
process may not be effective or could cause damage to
the drain. The best way to determine the condition of a
drain before cleaning is through visual inspection with a
camera. Improper use of this drain cleaner can damage
the drain cleaner and the drain. This machine may not
clear all blockages.
Machine Assembly
WARNING
To reduce the risk of serious injury during use, follow
these procedures for proper assembly. FoR/oFF/ReV
switch should be oFF and machine unplugged before
assembly.
5
PowerClear™ Drain Cleaning Machine
Cable
30" Guide Hose
Extension
Drain
Plug
Frame
Serial Number
Plate
(Underside)
Drum
Carry Handle
Warning
Label (120V)
NOTICE
AUTOFEED
Unit & 18"
Guide Hose
Clear Front
Housing
Foot
Switch
GFCI/Plug
Forward Rotation (FOR)
Power OFF
Reverse Rotation (REV)
Operation
Warning Label
FOR/OFF/REV
(I/0/II) Switch
Cord
Wrap
AUTOFEED
Hook
