RIDGID AC9944 Скачать руководство пользователя

Страница: 4 / 20

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.

Read The Operator’s Manual

Safety Alert

SYMBOL

NAME

DESIGNATION/EXPLANATION

Do not expose to rain or use in damp locations.

To reduce the risk of injury, user must read and understand
operator’s manual before using this product.

Eye Protection

Always wear safety goggles or safety glasses with side shields and,
as necessary, a full face shield when operating this product.

Precautions that involve your safety.

Wet Conditions Alert

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this
product.

SYMBOL

SIGNAL

MEANING

DANGER:

WARNING:

CAUTION:

Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury.

(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.

Содержание AC9944





















Результаты поиска

Содержание AC9944

Отзывы:

Похожие инструкции для AC9944

Бренды по названию

Популярные бренды

RIDGID AC9944, Руководство оператора

Результаты поиска

Содержание AC9944

Отзывы:

Похожие инструкции для AC9944

Бренды по названию

Популярные бренды