RidgeMonkey XF2 PLUS, Инструкция по эксплуатации

Страница: 2 / 8

2
XF2 Plus Porch Extension Assembly:
1. Remove the XF2 Plus porch extension awning section from the carry bag and connect it onto
the corresponding zip at the front of your previously assembled XF2 bivvy.
2. Inside the porch, assemble one of the supplied elasticated frame bars and attach it to the
Velcro tabs on the inside of the awning nearest the XF2 bivvy.
3. Clip the three short non-adjustable tension bars into their corresponding position to extend the
first section of awning away from the XF2 bivvy.
4. Assemble the remaining elasticated frame bar and attach it to the Velcro tabs on the inside of
the awning area furthest from the XF2 bivvy.
5. Clip the three long adjustable tension bars into their corresponding positions between the two
elasticated frame bars and adjust to extend the awning.
6. To increase frame rigidity where required, secure with supplied guy ropes. Ensure use of guy
ropes if using just the awning without the zip on sides.
7. Zip on the side & door sections and configure to your preference, pegging where necessary.
8. Finally, adjust the height of the upright frame bars using the camlock style lower legs.