RidgeMonkey ESCAPE BIVVY XF2, Инструкция по эксплуатации

Страница: 4 / 8

4
Flysheet:
1. Zip the flysheet to the corresponding zip on the rear of the Escape XF2, assemble the
elasticated curved flysheet support bar and attach it to the inside of the flysheet using the
velcro tabs sewn into the flysheet material.
2. Screw the supplied storm poles onto each end of the curved flysheet bar, locate the upright
storm poles in the velcro retaining flaps of the Escape XF2 and attach the flysheet hooks to the
retaining rings on the storm poles.
3. Adjust the height of the storm poles and peg the flysheet to the ground at the rear of the
Escape XF2, ensuring a generous gap between flysheet and bivvy for optimum protection.
4. Removal is a reverse of fitting.