9
Installing App & Linking Android
1.
Select the
Play Store
Icon on
your screen.
2.
Using the search feature, type in
ridetech
. There will be a list that
pops up of diff erent names, select
the
Ridetech RidePro X-HP
.
3.
Touch the
INSTALL
button to
download the RidePro X-HP app to
your phone.
4.
After the App loads, open it by
touching it on your screen.
The RidePro X-HP needs to be installed and
powered up to complete the following steps.
5.
Select the
Settings
Icon on your phone screen.
6.
Turn the Bluetooth On if it is off . The switch will
be blue. If it is not blue, slide the switch to the right
turning it blue.
7.
Open the Ridetech App on your phone.
When you open the App for the fi rst time “Allow
Ridetech to access this device’s location” will pop
up, select either choice. We do not monitor the
device location.
8.
After making your choice for the Location
Service, you should see
Image 8
. If you do not see
it, make sure the WCU is plugged in and the system
is turned on.
9.
The WCU can have either a Small Hole or Button
beside the plug. The button is fl ush with the case,
but can be pushed with your fi nger. If it has the
small hole, fi nd something small enough to fi t the
hole. We use a paperclip that has been straightened
out.
Peel off the “CAUTION - Excessive Force May
Cause Button Failure” Decal to expose the hole.
10.
If the WCU has the button, use your fi nger
to push the button until you fell it click. If it has
the small hole
,
insert the paperclip straight in the
hole. Push straight in
LIGHTLY
, until you feel a
click through the paperclip.
You do NOT need to
use a lot of pressure to push the button. Excessive
pressure will damage the unit.
The Green Light
on top of the ECU will start fl ashing rapidly.
The
Green Light will fl ash rapidly for 12 seconds.
11.
Touch the RT#### (this number is unit specifi c and will vary) number that is displayed.
This must be done while the Green light is fl ashing rapidly.
It fl ashes rapidly for 12
seconds.
12.
Once it is linked, you will see the Main Screen and the green light will go solid when
the unit is paired with your phone.
1.
2.
3.
4.
5.
6.
7.
8.
11.
3.
9.
10.