Ridetech 41583000, Руководство по установке

Страница: 6 / 8

1
2
9
10
812-482-2932
812-482-2932
Installation
Instructions
www.ridetech.com
Installation
Instructions
Finishing Harness Bar
9. Repeat Steps 2 - 8 for Opposite side and Re-
install Panels. The Shoulder Belt Bolt will stay
in place until ALL PANELS are installed. The en-
larged hole will slide over the Bolt. Once the
Panels are installed, the Bar Tab should stick
through the Cut Out Hole looking similar to
Diagram “9”.
10. Remove the Shoulder Belt Bolt. The Panels
will hold the Clamp in place until you Reinstall
the Bolt. Insert the Bolt into the OEM Shoulder
Belt Mount, reattaching the Mount to the Car.
Tighten the Shoulder Harness Mounting Bolt.
Snap the Bolt Cover back on, covering the Bolt
Head.
11. Install the Harness Bar[1] onto the Bracket
Tabs[2] that are sticking through the Panels.
Align the Harness Bar Mounting Holes with
the Tab Holes. Apply Anti-Sieze to the 1/2”-
20 x 1 1/2” Bolts[9] and insert them into the
holes. Next, install the 1/2”-20 Flange Nuts[10]
on the Bolts and Torque them to 75 ftlbs.
11.
6
9.
10.