3
812-482-2932
Installation
Instructions
SwayBar Installation
3.
Install the bushing strap onto the bushing
with the NARROW side to the outside of the
frame. Install a 5/16” fl atwasher and 5/16”
nylok on each bolt sticking through the bush-
ing strap and slave cylinder bracket. There
should be 2 bolts sticking through the slave
cylinder bracket and 2 bolts sticking through
both the slave cylinder bracket and bushing
strap. Do
NOT
Complete tighten the Hard-
ware. It will be left partially loose until the End
Links are installed.
4.
Install the End Links. Use Diagram “5”
for proper installation. Tighten the Hex Nut
enough to slightly compress the Bushings.
5.
Tighten the Sway Bar Mounting Hardware.
3.
6.
Reattached the end of the slave cylinder to the bracket.
4.
SWAYBAR
CONTROL ARM
