background image

2 - Manually setting the Base Altitude:

 

• While in the reset view of the Ski mode, press and hold B5. 

 

• Continue holding B5 until the watch displays the Base Altitude. The digits are          

 

    now flashing.

 

• Press B1 or B3 to change the value of the Base Altitude.

 

• Press B5 to exit setting mode and the watch returns to reset view. The watch   

 

    will also auto exit setting mode if there is no button activity for 2-3 minutes.

 

• The watch is now ready for the Ski run.

Performing the SKI run:

While in Ski mode reset view, press B1 to start. The 10 seconds timer will start to 

countdown. At the same time, the watch will check your current altitude. If your current 

Altitude is less than the base al 35 feet, The Ski mode will not run and the watch 

will return to reset view. If your current Altitude is more than the base al 35 feet, 

The Ski mode will start counting up until you reach the base altitude. The watch will 

auto stop at the base altitude giving you the exact time of your Ski run. Press B3 to 

reset the timer.

11.2 Ski Mode

* See next page for image

Содержание Godfrey Iron II











































Отзывы: