Rider 6 Riders, Руководство пользователя

Страница: 6 / 15

The AC & USB Charger
Note: Different country may has different adaptor
Before using: Charging the 6RMI
Before using this device, Please charge the 6RMI main device at least three hours.
We have provided you with the ability to charge the system via the USB port of your computer or if you are away on a
trip, you can use the supplied Multi-voltage USB power adapter .
The charging cable has a small USB plug for the headset and the large USB plug for the computer or AC adapter,
please observe to correct orientation of the USB plug and socket before inserting
1) Insert the USB plug of the charging cable, into the USB small jack of the headset , you can either charging by
computer or AC adapter .
2) While charging, the red LED on the headset module will illuminate,
when the charging is finished, the red LED will extinguish .
Note: if you do not use the headset for a month or more , to protect the Poly-Li battery, please charge the headset
at least every month. (the fault damaged by wrong charging will be not guaranteed).
Attaching and removing the BIM main unit on your helmet
With the clip, You can easily mount the main unit of the BIM on a helmet within 3 minutes.
Step:
1) find a best position on the
left side of your helmet to put the clip
2) Insert the inserted plate between shell and foam of the helmet
Fix the clip on the helmet with the screws
3) hang the main unit of the 6RMI on the clip
Clip Inserted plate for clip Spacer
----------------------------------------------------------------------- 5 ---------------------------------------------------------------------