Riden RD60 Series, Руководство пользователя

Страница: 49 / 77

49
The pause symbol (two, parallel white bars with a blue background) indicates the graph is paused. When
running the graph state is shown as a white arrowhead with a red background at the same position.
The pause/run state can be toggled by pressing
“
ENTER
”
in graph mode.
(Sometimes it needs to be pressed twice).
The rate at which the graph moves is controlled by the ‘ Graph Window ’ setting found within the ‘Quick
Settings’ Menu.
“
SHIFT
”+ “
▼
”
The fastest setting permitted is 1 minute and that implies that a set of values written at the right margin
will take 1 minute to be pushed to the left margin.
If the Graph Window setting was 1 hour then values will take 1 hour to move from the right margin to
the left margin.
The yellow ‘Graph Window Time’, shown top
left, is what is being set in the ‘
Graph Window ’
setting.
This image shows a graph of the RD60xx
driving a DC load in CR (constant resistance)
mode.
The resistance is lowered in stages
until the I-SET value is reached after
which the PS goes into CC mode.