声明：本说明书著作权归杭州睿登科技有限公司所有，未经允许任何单位或个人不得用于商业用途。
61
DH: preset voltage value
DV: model being connected
DI: preset current value
DW: product SN number
DJ: output ON/OFF button
DX: product firmware
DK: protection status indication
DY: main page
DL: battery status indication
DZ: network distribution page
DM: constant voltage/ constant current status EA:
personal center
DN: screen brightness
3.2.3 APP Operation
3.2.3.1 Network Distribution
Connect Wi-Fi for the first time, please insert the WiFi board to the right place,
then power on RD6024, you will see the blue LED blinks once. Set the
communication interface to WIFI, restart RD6024, then
place the RD6024 and the mobile phone close to the
2.4G router (the mobile phone must also be under the
same 2.4G network, and the router must disable the
AP isolation function and the WMM function).
RD6024 will wait for the phone to connect as
shown in figure 23. Press
“
EA
”
to choose Network
distribution, it will show like figure 24, then enter the
WiFi password and click INITIALIZATION. Wait about 20
seconds.
figure 23
