RS33 Riding Steward
User’s Manual
Special Note
The copyright of this operating manual belongs to Leidon Technology Co., Ltd.
Anyone (or party) may not use the contents of this manual in whole or in part
(including text and pictures) without the permission of its official written authori-
zation, to reproduce, transfer, copy, change content, scan storage, etc., for the
purpose of authorized use.
Leidon Technology Co., Ltd. has all the rights to modify or upgrade the function
of this product, and does not need to give special notice to anyone and party
(including those who have purchased and not yet purchased). If there are any
functional issues, please contact our company or check our updated information
online our webpage www.rideiwake.com
Safety and Notes
Health warning
Heart rate monitor is an accessory used by consumers as a sporting auxiliary rather
than medical devices. Subject to some external factors, the readings are only for
reference.
Battery warning
If the following guidelines are not followed, it may cause damages, fire, chemical
burns, electrolyte leakage to the device, shorten the battery life and bring risk of
injury.
Please do not expose the device to heat or in a hot place.
Please do not punch or incinerate the device or battery.
Please store the device in the temperature range of 0°--- 25°C for long time
storage.
Please do not operate the device at temperatures other than -10°--- 45°C.
Please do not charge the device at temperatures other than 0°---45°C.
Please consult your local waste disposal department in accordance with applica-
ble local regulations when disposing your equipment/battery.
Please do not use sharp objects to remove the battery. The battery of this product
is not removable. If the battery is not replaced properly, it may explode. Please
do not replace the battery by yourself.
Warranty Service
RIDEIWAKE product is guaranteed to have no defects in materials or manufactur-
High Beam and Low Beam dual source lighting, can be independently
controlled.
Intelligent Brightness Mode can automatically adjust the brightness in
accordance with the riding speed.
Wireless remote switch enables an easy control of heart rate measurement
and bike light levels.
Built-in intelligent temperature regulation circuit to prevent overheating of
the device.
Quick mounting and dismounting bracket, adaptable to different bicycle
handlebars.
IP66 dustproof and waterproof, 1-meter impact resistant.
More than 2 years Standby Mode runtime.
2. Charge the device
Built-in Two 18650 rechargeable li-ion batteries, RS33 can be charged with a USB
cable (Be sure the charger or cable you are using is produced by certified supplier
with a safety certification).
A waterproof rubber cover is on the back of the product. Open the rubber cover
and connect RS33 and the power source with standard USB charging cable, it will
start charging.
This product supports 5V/2A charging, and takes about 4.5 to 6 hours for fully
charge, depending on the charging environment.
When charging, the RS33 will be turned off while the battery icon is displayed on
the screen, and the three buttons flash blue. To save power, the screen backlight
will be turned off automatically, and you can wake it up by pressing any button to
view the charging status.
When the battery is full, the middle button blue light is lit, RS33 will be OFF and
has no response on pressing buttons. Removing the Micro_USB cable and wait for
2 seconds, RS33 will automatically exit the OFF state and can be turned on
normally.
Notes
To prevent RS33 contacting points from being corroded, please make sure the
charging contacts are completely dry and clean before connecting to the power
source.
For long time storage, in order to maintain the Li-ion battery activity, please
charge RS33 once every six months. Please do not store RS33 in places with direct
sunlight or high temperature.
When the ambient temperature is out of the range of -10° to 45°C, please do not
charge the device.
3. Mounting and Dismounting the bracket
To ensure the best GPS signal
reception, please use the
standard bracket for mounting
RS33 to bicycle handlebar, and
make the screen facing the sky.
This product includes three
rubber pads, one thick & two
thin.
4. Buttons and lighting instructions
This product has 5 buttons in total, the operation includes short press, long press
and double-click, of which long press time is 3 seconds, double-click time is
within 0.3 second.
Power button – for turning device on or off; for enter
Pause button – for start or pause; for backtrack
Manual button – for manual; for page up or page down
- button – for turning on LED light; for decreasing light lever; for scrolling
down options
+ button – for turning on LED light; for increasing light level; for scrolling
up options
5. Turning RS33 ON/OFF
Long press button, RS33 is on; long press button again, RS33 is off
.
6. Custom Settings
6.1, For the first time you turn on RS33, please set up
the unit in metric or imperial according to your usage
habits, including three types: speed & mileage,
altitude, and temperature as the chart:
Operation: long press button to enter Menu
setting system Units
6.2, In order to calculate the calories more accurately,
please input personal information such as gender, age,
weight, height etc. This product is a closed system
which cannot connect to internet; thus, the personal
information will not be disclosed.
Operation: long press button to enter Menu
setting system User profile
6.3, Set your own opening words
Users can customize the opening words of your RS33.
Operation as below:
Long press button to enter Menu setting
welcome page
How to input words:
Short press or button to select the character,
short press button to confirm selection. If you
need to delete character, please select the
charac-
ter, then short press the button to delete the
character, from the back to the front. Press button
to switch to the next line. After completing the entry,
press button to save and exit.
7. Start riding
7.1 Main Interface Description
Bluetooth connection icon
Battery indicator of remote switch. When the battery voltage is lower than 3.3V,
this icon appears and flashes to remind you to charge the remote switch ASAP.
Battery indicator of RS33. It is divided into four compartments to indicate the
power. When the battery voltage is lower than 3.3V, it is displayed as a red frame,
to tell that the power is insufficient and needs to be charged ASAP.
Satellite icon. This icon flashes when RS33 searches for satellites. After the it is
positioned, the icon is fixed.
GPS signal icon. This icon appears as a border when RS33 is searching for
satellites.
When RS33 is positioned, the icon is displayed in orange. If GPS signal is good, 9
compartments are fully displayed.
Clock. It is the GPS given time. To accurately display the local time, please
manually set the local time zone.
Riding Direction Light Modes
7.2, GPS and Riding Data Reading
Before RS33 detects and records your riding speed and distance, you must
complete the GPS positioning in first.
1. Long press button to turn RS33 on.
2. Please stay in your position and wait for the satellite to complete the
positioning before moving. When the positioning is completed, the satellite
signal bar will turn orange.
3. Short press button to start riding. You can pause or start the ride at any
time by pressing button.
4. Short press button to scroll between the first page and the second page of
riding data.
Notes
It takes about 30 to 60 seconds for RS33 to get GPS satellite signals. When there
are shelters around or it is in a rainy weather, the searching time may be extended.
1. Turn RS33 on in an open area with no shelter around.
2. Ensure RS33 screen is facing the sky.
3. Waiting for the device to search GPS satellites.
4. During its searching (satellite icon flashes), do not move in order to maintain
the searching speed.
5. During its searching, please avoid surrounded tall buildings, trees, high-voltage
power towers ect.
7.3, Screen Backlight Setting
RS33 has two backlight brightness settings suitable for
daytime and nighttime respectively. In order to obtain
good visual effects and save battery power, please set
the backlight properly.
Operation: Scroll though Menu Setting
Brightness
Daytime backlight: LED light is off, enter the menu to
set the backlight brightness.
Nighttime backlight: LED light is on, enter the menu
to set the backlight brightness.
Notes
RS33 will automatically switch from daytime backlight to nighttime backlight
when the LED is turned on at night.
If the backlight brightness is too high at night, it may affect the riding vision.
Please set it properly.
7.4, Historical Record
Operation: Long press button to enter Menu
history rides. Short
press or button to scroll data pages.
Note: If the storage space of RS33 is insufficient, the
older history will be overwritten.
How to save riding record
1. Turn off RS33, it will automatically save the riding
data.
2, Scroll through Menu New start, RS33 will
automatically save the previous riding data.
3, Scroll through Menu
Tools to use countdown or
other training tools, RS33 will automatically saves the
previous riding data.
7.5, Restarts a New Ride
Access menu and select New Start to start a new ride. The previous ride data will
be automatically saved by RS33 and can be viewed in the history.
7.6, LED Brightness Control During Riding
During riding, RS33 LED lights can be easily turned on and off. There are dual
light sources in RS33 including High Beam and Low Beam, which can be
independently controlled and adjusted or made different combined light levels at
your wishes.
Short press or button, the both LED lights turn on.
With the LED lights on, short press button, the Low Beam will be switched
to different level through 0--100Lm--200Lm--500Lm--800Lm;
With the LED lights on, short press button, the High Beam will be switched
to different level through 0--100Lm--200Lm--500Lm--800Lm.
Double click or button, it will enter special mode. Short press or
button to cycle through SOS-Strobe-Flashing Mode. Double click or
button again, the light will resume to previous stable light.
Short Press button to turn off the LED lights. RS33 will automatically
memorize the last brightness mode. Next time turn on the lights, it will directly
enter the memorized brightness mode.
7.7, Instant One-click Response: High Beam / Low Beam
In order to see clearly remote area, please activate the One-Click-To High Beam.
Long press the button, the High Beam light outputs 900Lm and Low Beam
light 200Lm, with a throw up to 150 meters.
Short press the or button to exit this one-click mode and resume to
previous light level.
In order to see clearly near area, please activate the One-Click-To Low Beam.
Long press the button, the Low Beam light outputs 900Lm and High Beam
light 200Lm, with broaden illumination in front of the wheel.
Short press the or button to exit this one-click mode and resume to
previous light level.
7.8, Intelligent Brightness Mode
RS33 equips Intelligent Brightness Mode. The
brightness is automatically adjusted according to
the riding speed, which greatly increase riding fun
and save battery power.
With the lights on, long press Button to enter the Intelligent Brightness
Mode. The lower left corner of the screen will indicate from manu AUTO.
8. Flashlight Mode
RS33 can be used as a flashlight.
Long press button, Low Beam light turns on, and can be adjusted through
0--100Lm--200Lm--500Lm--800Lm.
Long press button, High Beam light turns on, and can be adjusted through
0--100Lm--200Lm--500Lm--800Lm.
To turn off the light and exit Flashlight Mode, please long press button. This
can effectively prevent false triggering in hand.
Flashing Special functions are also available in the Flashlight Mode, the
operation is the same as that during riding.
9. Candle Lamp Mode
For camping or special circumstances, there is needs for long time ultra-low
illumination. Please activate Candle Light Mode.
Operation: Long press button to access the Menu Candle Lamp
Long press button for 3 seconds, Candle Lamp Mode is off.
10. Wireless Remote Switch
RS33 comes together with a Wireless Remote Switch.
With RS33 on, long press the & buttons simultaneously, the button
indicator will flash twice and the remote switch is activated.
Install the remote switch close to RS33, a heart icon will appear on the RS33
screen, indicating that the remote switch and RS33 are connected.
With RS33 LED lights on, short press or button, the LED Low beam or
High beam can be adjusted to different levels independently. This is equivalent
to short pressing the or button.
With RS33 LED lights on, long press button, RS33 will directly enter turbo
mode 1800LM and last for 30S.
Long press button
，
the indicator on the heart rate window will flash
green. Press and hold your finger softly on the window for 15 to 20S (to ensure
measurement accuracy, please do not press hard), RS33 screen will indicate the
heart rate. You can measure your heart rate while riding.
Release finger from the heart rate window, the heart rate sensor will automatical-
ly stop measuring after a few seconds. Put your finger on the window again, the
heart rate sensor will automatically starts working again.
If the ambient light is strong, the window may lit on green light. Please long
press button to turn off the heart rate measurement.
11. Practical Tools
RS33 is equipped with multiple riding tools, to help users measure exercise
intensity, schedule training programs ect, including countdown time, countdown
mileage, two-point ranging, and stopwatch. Tool functions can be accessed via
menu Tools. For detailed operation, please download and check our detailed
instructions on www.rideiwake.com.
12. Record LON & LAT
Access Menu LON&LAT, the latitude and longitude (WGS84 coordinates)
of your location is indicated and you can define the name of this place.
RS33 in maximum can store LON & LAT of 5
locations. More than 5 records, the new one will
automatically overwrite the old one.
How to input words:
Short press or button to select the
character, short press button to confirm
selection. If you need to delete character, please
select the
character, then short press the
button to delete the character, from the back to the
front. After completing the entry, press button
to save and exit.
Use the menu to re-enter the stored location data for reading or changing names.
Brightness
10:25
5
2019-10-21
01/32
Trip Time
Distance
Avg Speed
Max Speed
Ascent
Descent
Calorie
Kcal
m
m
Km/h
Km/h
Km
01:25
19.9
28.7
31.2
67
62
382
+
M
ing processes. Within one year from the date of purchase, RIDEIWAKE will repair or replace, at
RIDEIWAKE’s options, the failed parts of the device which is under normal use. This warranty
does not apply to:
(1) Surface damage such as scratches and dents.
(2) Consumables such as batteries. Damages caused by material defects or manufacturing
processes are excluded.
(3) Damage caused by accident, abuse, misuse, water ingress, flooding, fire or any external
factors.
(4) Damage caused by repairs by non-RIDEIWAKE authorized warranty personnel.
(5) Damage caused by artificial modification of the device without the written consent of
RIDEIWAKE.
RS33 Specification
1. Features
Full-metal aviation aluminum alloy forged body with CNC carving and hard anodizing
finish.
2.4-inch IPS full-view color screen with a variety of backlight brightness adjustable.
Built-in large capacity 6000mAH Li-ion battery, Micro USB charging up to 2A current.
Support high-precision GPS satellite positioning system.
Rich professional cycling data visually displayed, including speed, distance, time, altitude,
slope, calories, temperature measurement and heart rate etc.
Longer than 40H lasting runtime for GPS bike computer.
Up to 1800 lumens of strong light output, different modes and brightness
adjustable.
13. Temperature Regulation
RS33 has built-in temperature regulation circuit and professional algorithm,
which automatically adjusts the brightness output according to the working state
and ambient temperature to ensure the device will not be over heated.
14. Battery Power Indicator
Batter Power > 90%
Batter Power > 70%
Batter Power > 50%
Batter Power > 30%
Batter Power < 10%, please charge your device ASAP
15. Set Your Time Zone
To have accurate local time display, please set your time zone in first.
Operation: Long press button to access Menu Setting Time zone,
then selection your local time zone.
For more information, please visit our official website:
www.RIDEIWAKE.com
This manual is for reference only. The specific functions and product images may be slightly different from
the actual ones. Please refer to the actual product.
01
03
07
08
09
10
06
05
04
02
11
