Ride
™
Java
®
Cushion Owner’s Handbook
5
www.ridedesigns.com
Well Insert
Java Cushion well inserts introduce subtle contact and envelopment of the ischial
tuberosities which may be desirable to improve the general “feel” of the cushion,
and/or provide gentle support to hemorrhoid tissue.
Initial Wearing Schedule
Prior to prolonged sitting, it is advisable to sit in your cushion for short periods of time.
Make sure to visually check any area that contacts the cushion after each period of use.
Any reddened area should fade within 10-30 minutes.
Y
Contact your doctor or therapist if the redness persists for greater than 30 minutes as
this can be an indicator of initial skin breakdown and risk of injury.
As long as skin inspections do not show red areas persisting more than 30 minutes,
extend the length of sitting time gradually (half to one hour each day). Continue skin
checks after each increased sitting time. Two to four hour periods are the general
recommended maximum time in the sitting position. Skin checks should be made no less
than daily, even after skin tolerance is established. Continue to perform routine intermittent
pressure relief techniques (either manual lifts or weight shifts using power tilt) as advised
by your healthcare professional.
Follow up
It is recommended to have your seated posture and skin integrity checked by your
healthcare professional at least annually, or whenever you experience a change in
your weight, posture, or general condition that could impact your ability to sit safely,
comfortably, and functionally.
Care and Maintenance of the Java Cushion
Cleaning the Java Cushion outer cover
•
Remove your Ride Java Cushion from the wheelchair.
• Remove the outer cover from the cushion. Zip cover closed.
• Machine or hand wash in warm water (40°C/104°F, regular detergent/no bleach).
• Hang dry.
Cleaning the Java Cushion top foam layer with moisture barrier
Y
Always clean Java Cushion top foam layer by hand. Never fully submerge the top
foam layer with protective moisture barrier in any liquid. Moisture barrier covering has
venting features on the underside of the top foam layer that could allow fluid absorption
by the internal foam and lead to contamination and premature aging of the foam insert.
Y
Do not attempt to remove the moisture barrier from the top foam layer. Removal of the
moisture barrier will result in premature aging of the cushion and will void the warranty.
Y
Regularly inspect the moisture barrier for tears and perforations when cleaning your
Java Cushion. In the event of an accidental puncture of the moisture barrier, contact your
authorized Ride Designs provider for a patch kit. Use of the cushion with a compromised
moisture barrier could lead to further product damage and premature aging.
• Using a household disinfectant cleaner, spray soiled areas of outer moisture barrier
and wipe clean using disposable towels.
• Allow to air dry.
Laundry Care Symbols
h
H
Machine wash warm water (40˚ C)
Do not bleach
Drip dry
Do not dry clean
Do not iron
V
K
C
