III. Adjusting FlexLoc for back fit
1. Adjust back height.
a. Use the 4mm allen wrench to
loosen clamp screws and slide
FlexLoc up/down on back canes,
and/or
b. Use the 4mm allen wrench to
loosen back height set screws
and slide back up/down on track.
2. Adjust back angle.
a. Use the 4mm allen wrench to
loosen back angle screws (4)
and adjust back angle to desired
orientation.
b. Loosening of these screws also
provides for lateral movement of
center clamp along connecting
tube for lateral adjustment of back
support.
5
Lateral Position
Back Angle
b
a
