Using the car
To use the car, turn it on with the key start.
Select forwards or reverse using the dashboard switch and
select 'low' on the speed control switch.
Press down on the pedal to drive. Release the pedal to stop.
Once familiar with the controls, use the car in 'high' speed
mode.
To use the remote control, switch the car off. Hold down the
button indicated above as 'Pair' on the remote control, and then
turn the car on at the power switch. The remote is now paired
and ready to use.
Use the 'speed' button to cycle between slow, medium, high
speed. The up/down buttons drive the car in forwards and
reverse. The left/right buttons move the steering left and right.
To disable all drive motors, press the 'P' button. The light on the
remote will flash, indicating that all drive functions are disabled.
Press the 'P' button again to re-enable drive.
