Ridder NoNa+, Инструкция по установке и эксплуатации

Страница: 61 / 72

Figure 6-6: The Start purification manually screen
On the top bar, tap the Start Purification Manually icon ‘ '.
Select a drain water group (bottom left).
Tap the Start icon ‘
'.
The NoNa
+
first initiates a short flush with fresh water. Once this is done, the NoNa
+
will start the purification process.
The Start purification manually screen displays the details of the drain water
group, such as process status (where 1 is 'charging stack' and 2 is 'discharging
stack'), flow rate in drain water circuit and EC value of the drain water.
Manual intermittent (acid) cleaning start
It is also possible to start the intermittent (acid) cleaning process manually. To do
this, complete the following steps:
Navigate the path: .
Tap the Manual cleaning start setting. A pop-up menu appears.
Select start.
Tap the Confirm icon ‘
'.
The NoNa
+
will start the intermittent (acid) cleaning process once the purification
cycle is completed.
You can also pause and stop the intermittent (acid) cleaning process with the
Manual cleaning start setting.
NoNa
+
61